Tecfluid AMR For 2000 Series Instrukcja Użytkownika Pobierz pdf (Strona 2)

INTRODUCTION

The PT-AMR is a magnetically operated bi-stable reed switch, operated by the magnet in the

flowmeter’s float. The limit switch can be supplied as a normally open switch when the float is

below the switch (PT-AMR NA), or as a normally closed switch (PT-AMR NC).

ELECTRICAL CONNECTION

For the electrical installation, a multi-conductor cable should be used to obtain a good seal with

the cable gland. The connector is provided with a PG 9 cable gland, suitable for a 4.5 to 7 mm

outside diameter cable. Terminals 1 and 2 of the connector are connected to the two ends of the

reed switch.

PTM / PSM

DN 15 20

½" ¾"

A 47 52

PT / PS

DN 15 20 25 40 50 65 80

½" ¾" 1" 1½" 2" 2½" 3"

A 47 52 62 70 70 90 90

6000

DN 15-20 20-25 40(1) 40(2) 50 65-80

½"-¾" ¾"-1" 1½" 1½" 2" 2½"-3"

A 48 51.5 61 67.5 80 94

In the female connector:

Terminal 1: Reed switch contact

Terminal 2: Reed switch contact

Terminal 3: No connection

Earth terminal: No connection

1 2 3 4

Brak uwag

Tecfluid AMR For 2000 Series Instrukcja Użytkownika Strona 2